jog-00114 optical components rev.4 [10. 2008 ] OL395N-100-P20 1310nm+/-20nm 100mw pulsed mqw las er diode coaxial module with smf. 1/5 1. description OL395N-100-P20 is a 1310nm laser diode in coaxial package with smf. 2. features fiber output: po=100mw pulsed mqw fp laser coaxial package module single mode fiber (smf) 3. application otdrs optical measuring instruments 4.optical and electrical characteristics (t ld = 25c, 10s pulse width and 1% duty) parameter symbol test conditions min. typ. max. unit threshold current ith --- --- 20 50 ma operation current iop --- 700 800 ma ld forward voltage vf --- 2.0 3.0 v center wavelength c po=100mw 1290 1310 1330 nm spectral width po=100mw, rms 1 --- 5 10 nm
jog-00114-r4 OL395N-100-P20 2/5 5.absolute maximum rating (tc = 25c, unless otherwise specified) parameter symbol rating unit fiber output power po 120* mw ld reverse voltage v r (ld) 2.0 v ld forward current i f (ld) 1000* ma operating temperature topr -20 to +60 c storage temperature tstg -40 to +85 c pulse width 10 s , duty 1% exceeding these ratings may lead to immediate destruction or permanent deterioration of the device. 6. connector and fiber specifications parameter specifications unit type smf --- mode field diameter 10 1 m cladding diameter 125 2 m jacket diameter 900 m length 1 (min.) m connector fc/spc --- 7.ordering information ol3 95 n ? 100 - p 20 wavelength range 3: 1.3m package number device structure n: fp laser optical output power laser in mw pulsed wavelength tolerance 20: +/- 20nm 8.attached data (at 25 c ) (1) if-po graph (2) spectrum graph at po=100mw (3) operating current (iop) at po=100mw (4) center wavelength ( c) at po=100mw (5) spectral width ( ) at po=100mw (6) threshold current (ith)
jog-00114-r4 OL395N-100-P20 3/5 9.outline drawing all dimensions in millimeters tolerances unless noted +/-0.5 package no. 95(unit: mm) 23.6 19+/-1 4 3-?0.45 +/-0.2 ld ?6.8 2 2 3 1 6.4 ?4 7 12.7 17 1 case 1 2-?2.2 2 3 46.6 +/-1.5
jog-00114-r4 OL395N-100-P20 4/5 10. safety information on this product warning laser beam a laser beam is emitted from this laser diode during operation. the invisible or visible laser beam, direc tly or indirectly, may cause injury to the eye or loss of eyesight. do not look directly into the laser beam. avoid exposure to the laser beam , any reflected or collimated beam. caution gaas product the product contains gallium arsenide, gaas. gaas vapor and powder are hazardous to human health if inhaled, ingested or swallowed. do not destory or burn the product. do not crush or chemically dissolve the product. do not put the product in the mouth. observe related laws and company regulations when discarding this product. the product should be excluded from ge neral industrial waste or household garbage. caution optical fiber a glass-fiber is attached on the product. handle with care. when the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments. all specifications described herein are subject to change without notice.
jog-00114-r4 OL395N-100-P20 5/5 notice 1. the information contained herein can change without notice owing to product and/or technical improvements. before using the product, please make sure that the information being referred to is up-to-date. 2. the outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. when planning to use the product, please ensure that the external conditions are reflected in the actual circu it, assembly, and program designs. 3. when designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. oki semiconductor assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. neither indemnity against nor license of a third part y?s industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. no responsibility is assumed by us for any infringement of a third party?s right which may result from the use thereof. 6. the products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communicati on equipment, measurement equipment, consumer electronics, etc.). these products are not authorized for us e in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. such applications include, but are not limited to, traffic and auto motive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. certain products in this document may need government approval before they can be exported to particular countries. the purchaser assumes the responsibility of dete rmining the legality of export of these products and will take appropriate and necessary st eps at their own expense for these. 8. no part of the contents contained herein may be reprinted or reproduced without our prior permission. copyright 2008 oki semiconductor co., ltd.
|
